Drawing
|
„CABX“ – The ionizing bar with air
support
Easy to install!
No high voltage cables needed. The high voltage is generated
inside the bar.
- Balance: <±30V
- Decay time: <1s @ 3 bar
- Air pressure: 0-5 bar
- Airflow per nozzle: 9-10 l/min @ 3 bar
- Emitter voltage: 10kV / 200Hz (HDC-AC)
- Thungsten emitter needles (Needles made of silicon or glass are available on request)
- Power supply: 24V DC / 3.6VA
- Dimensions: H = 92mm x B = 29mm
- Weight: 650g @ L = 600mm
| Code: |
Length: |
| 15S-CABX | 350 - 3100mm (in 250mm
steps) |
|
Drawing
|
„Power Bar“ – The ionizing bar with air support
The air support enables the elimination of static and dust over a large distance.
The dedicated brackets enable adjustment of the ion output direction.
The emitter needles can be easily detached/attached.
- Balance: <±30V
- Decay time: <1s @ 400mm
- Air pressure: 0.2 - 2 bar
- Airflow per nozzle: 3.1 l/min
- Emitter voltage: AC 7.0kV / 50Hz (SAT-11)
- Standard cable length: 1m (other length on request)
- Dimensions: H = 58mm x B = 32mm
- Weight: 0.75kg @ L = 810mm
| Code: | Length: |
| 15S-SSPB | 310 - 1810mm (in 100mm
steps) |
|
Drawing
|
„Slim Bar“ – Compact configuration; ideal for installation in small spaces
- Balance: <±100V (not suitable for electronic devices)
- Decay time: 0.1s @ 20mm
- Emitter voltage: AC 7.0kV / 50Hz (SAT-11)
- Standard cable length: 1m (other length on request)
- Dimensions: H = 25mm x B = 13mm
- Weight: 280g @ L = 600mm
| Code: | Length: |
| 15S-SSBHCS | 100 - 1600mm (in 50mm
steps) |
|
Drawing |
High voltage transformer SAT-11
- Dimensions: 90 x 220 x 110mm
- Weight: 3.9kg
- Output voltage: 7.0kVAC/50Hz
- max. output current: 2.5mA
- maximum load: Total bar length + total cable length: ≤8m
(A branch box is equal to a cable length of 1m)
| Code: | |
| 15S-SAT-11 | High voltage transformer |
|
Drawing |
High voltage transformer SAT-20
with 2 high voltage outputs
- Dimensions: 150 x 230 x 180mm
- Weight: 6kg
- Output voltage: 7.0kVAC/50Hz
- max. output current: 5mA
- maximum load: Total bar length + total cable length: ≤12m
(A branch box is equal to a cable length of 1m)
| Code: | |
| 15S-SAT-20 | High voltage transformer |
|
Drawing |
High voltage branch boxes - to supply several
bars
| Code: | |
| 15S-SV2 | to supply 2 bars |
| 15S-SV3 | to supply 3 bars |
| 15S-SV4 | to supply 4 bars |
|
 |
High voltage cable for high voltage boxes
| Code: | Length: |
| 15S-HV05 | High voltage cables 0.5m |
| 15S-HV10 | High voltage cables 1.0m |
| 15S-HV15 | High voltage cables 1.5m |
| 15S-HV20 | High voltage cables 2.0m |
|
